Deskripsi
Sandpiper S30 3" Containment Duty AODD Pump Pumping Diaphragm for Non-Metallic Pumps
Genuine Sandpiper pumping diaphragm replacement parts for compatible S30 3" Non-Metallic Containment Duty AODD pumps. Confirm the complete pump identification, diaphragm configuration and manufacturer part number before ordering.
The Sandpiper S30 3" Containment Duty Pumping diaphragm is a genuine replacement process-side component for compatible Non-Metallic AODD pumps. The Pumping diaphragm is positioned on the wet side of the sealed containment chamber and is separate from the Driver diaphragm.
Product Overview
The Sandpiper S30 Pumping Diaphragm must be matched to the complete pump configuration. The manufacturer-listed Pumping material or component can differ from the Driver side, so the complete diaphragm/check-valve material code and exact part number should be checked before ordering.
SANDPIPER Containment Duty pumps use a two-diaphragm design with a sealed containment chamber between the Driver and Pumping diaphragms. This arrangement creates an additional barrier between the air side and wet side of the pump.
ABS Engineering supplies genuine Sandpiper replacement parts and can assist with identifying the correct diaphragm from the complete pump model number and existing manufacturer part number.
Recommended For
- S30 Containment Duty Pumping diaphragm replacement
- Process-side wet-end maintenance
- Containment chamber inspection and servicing
- Exact manufacturer part-number replacement
- Critical spare-parts stock
Driver Diaphragm vs Pumping Diaphragm
The Pumping diaphragm is the process-fluid-side diaphragm, while the Driver diaphragm is on the air side of the containment chamber. The two diaphragms work as part of the same containment arrangement but are separate replaceable components with separate applicable part numbers.
Compatibility & Product Details
| Brand | Sandpiper |
|---|---|
| Compatible Pump Model | Sandpiper S30 |
| Pump Series | Containment Duty Ball Valve |
| Nominal Pump Size | 3" / 80 mm |
| Part Type | Pumping Diaphragm / Diaphragm Component |
| Compatible Pump Construction | Non-Metallic |
| Design Level | Design Level 3 |
| Diaphragm / Check-Valve Material Codes | 3 and 4 |
| Pumping Diaphragm Component | Santoprene Pumping Diaphragm, PTFE Pumping Overlay |
| Manufacturer Part Number | Varies according to the selected material or component |
How to Select the Correct S30 Pumping Diaphragm
Confirm the complete S30 pump identification before selecting a replacement pumping diaphragm. Do not select by pump size or diaphragm material alone because the applicable component depends on the manufacturer-listed pump configuration.
Confirm Pump Model
Verify that the pump is a Sandpiper S30 3" Containment Duty AODD pump.
Confirm Pump Construction
Check that the pump construction is Non-Metallic and verify the complete model identification.
Check the Diaphragm Code
Identify the applicable diaphragm/check-valve material code: 3 and 4.
Verify Part Number
Match the required pumping diaphragm material or component to the exact manufacturer part number.
Sandpiper S30 Pumping Diaphragm Part Numbers
Use the table below to identify the manufacturer-listed pumping diaphragm material or component for the applicable S30 Containment Duty configuration.
| Pump Code | Pumping Diaphragm Material / Component | Manufacturer Part Number |
|---|---|---|
| 3 | Santoprene Pumping Diaphragm | 286.080.354 |
| 3 | PTFE Pumping Overlay | 286.079.600 |
| 4 | Santoprene Pumping Diaphragm | 286.080.354 |
Why Choose Genuine Sandpiper Pumping Diaphragms?
Genuine Sandpiper diaphragms are intended for compatible Sandpiper Containment Duty pump configurations. Matching the correct material, construction and manufacturer part number helps maintenance and purchasing teams identify the correct physical replacement component.
Correct Model Compatibility
Select the replacement diaphragm according to the applicable S30 pump configuration.
Exact Part Identification
Use the complete manufacturer part number rather than material name alone.
Containment-Specific Selection
Keep Driver and Pumping diaphragm roles and multi-component constructions clearly identified.
Genuine Sandpiper Replacement Part
Maintain compatible pumps using genuine manufacturer replacement components.
When Should the S30 Pumping Diaphragm Be Inspected?
Inspect the applicable diaphragm components during planned pump maintenance and whenever leak detection, abnormal pump behaviour or visible component condition indicates that diaphragm inspection is required.
- During scheduled containment wet-end maintenance
- If visual, electronic or mechanical leak detection indicates a containment event
- If process fluid is found in the containment chamber during inspection
- If visible wear, cracking, deformation or diaphragm damage is identified
- When abnormal pump performance leads to wet-end inspection
Frequently Asked Questions
What is the difference between the Pumping and Driver diaphragm?
The Pumping diaphragm is on the process-fluid side of the containment chamber, while the Driver diaphragm is on the air side. They are separate replacement parts.
Which S30 Pumping diaphragm variants are listed on this page?
The applicable selections are Santoprene Pumping Diaphragm, PTFE Pumping Overlay. Confirm the complete pump code before ordering.
Is 286.079.600 a complete PTFE Pumping diaphragm by itself?
No. The current S30 service parts list identifies 286.079.600 as a PTFE Pumping overlay and lists 286.080.354 separately as the Pumping diaphragm.
Can I select the Pumping diaphragm by material alone?
No. Confirm the complete pump identification, diaphragm/check-valve material code and manufacturer part number before ordering.
Do Driver and Pumping diaphragm materials always match?
No. Some Containment Duty configurations use different Driver and Pumping materials or constructions. Follow the manufacturer-listed pump configuration rather than selecting the two sides independently.
How do I confirm the correct S30 Pumping diaphragm part number?
Check the complete pump model number, diaphragm/check-valve material code and existing part number. If the identification is unclear, provide the pump nameplate details to ABS Engineering for verification.
Explore Other Sandpiper Containment Duty Diaphragms
S30 Driver Diaphragm
View the matching driver-side diaphragm parts for the same Containment Duty pump model.
View Driver Diaphragm →S20 Containment Duty Diaphragms
Browse compatible Driver and Pumping diaphragm replacement parts for the S20.
View Product →ST40 Containment Duty Diaphragms
Explore genuine replacement diaphragm parts for the ST40 Containment Duty pump.
View Product →All Containment Duty Diaphragms
Browse Sandpiper Containment Duty Driver and Pumping diaphragms by model, size and pump construction.
View Collection →Need Help Selecting the Correct S30 Pumping Diaphragm?
Send ABS Engineering your complete Sandpiper pump model, existing diaphragm part number, pumped fluid and operating conditions. Our team can assist with identifying the correct genuine Sandpiper replacement part.